axial load造句

1、Larger contact Angle type has better axial load capability.

2、Deep groove ball bearings mainly take radial load as well as take moderate axial load.

3、Self-aligning ball bearings may withstand the big radial direction load, also can withstand the axial load.

4、OBJECTIVE: To investigate the impact of axial load on lumbar dural sac.

5、This type of bearings is separable, which can only carry axial load.

6、The effect of axial load ratio on behavior of square concrete-filled steel tubular column

7、Creep computation module of self-stressing concrete-filled steel tube under axial load

8、Slewing ring bearings to withstand a large-scale integrated load bearing support, which can bear a greater axial load, radial load and tipping moment.

9、In addition, results of the linear regression for stress and instantaneous strain show that the instantaneous axial strain and axial load approximated to grow proportionally.

10、The effect of axial load series of train and the distribution of load by the rigidity of track of support is noticed.

11、Besides, the eccentricity magnifying coefficient and the axial load limit for steel reinforced concrete column were also introduced.

12、Other test parameters include the level of axial load in the CFST column, the load level in the RC beam and the beam-column stiffness ratio.

13、Deep groove ball bearing is inseparable bearing, mainly it can be subject to radial load and some axial load as well.

14、Special emphasis is put upon the effects of the axial load level ratio and the web reinforcement ratio on ductility.

15、Direct strength method for calculation of the bearing capacity of thin-wall aluminum alloy members under axial load

16、The axial load and centralizer spacing from the bottom to the top are calculated by using the mechanical analysis method and the well trajectory data.

17、These bearings have a particularly high axial load carrying capacity and are used primarily as thrust bearings in rolling mill applications.

18、Tapered members under the axial load: the stresses formulas of the tapered members and those of the prismatic ones are identical.

19、Double row angular contact ball bearings are a form of back-to-back pairs of single row angular contact ball bearings, which support axial load in both directions as well as support radial load.

20、The flexual deformation of casing in a horizontal hole is caused not only by the uniform transverse load from dead weight, but also by the axial load, and the existence of initial bent if any.

21、Two-way pressure has mounted on ball bearings between the shaft and two outer rings, in the middle ring and outer ring were added between the steel ball, able to withstand the two-way axial load.

22、Carrying axial loads in both directions.

23、Each specimen underwent axial and torsional stiffness testing along with cyclic axial loading to failure.

24、Although all bicycles use a combination of both axial and radial loading, the recumbent tricycle places much more emphasis on axial loading.

25、Probability distribution of ultimate resistance capacity of axial loaded short concrete-filled tube column

26、The tank location for these vehicles is chosen for optimum airframe design for axial loads.

27、Experiments of four-legged concrete filled steel tubular laced columns subjected to axial loads