motion control造句
1、incremental motion control systems
2、line motion control system
3、motion control function
4、Analysis and control of a novel planar motion control system
5、Dynamics modeling and motion control for lower limb exoskeleton orthosis
6、Research on feedback scheduler for networked motion control systems
7、The VC program is a good motion control card example above, can be well connected to motion control card to control the motor start and stop.
8、In motion control system, interpolation calculation and tracking control are hard real-time tasks.
9、Control system in soft-trademarks machine of PVC based on the motion control card
10、It has completed the design of palletizing robot control system. And the control system has realized motion control of system.
11、In order to control the single joint's motion of the robot, a joint servo controller which integrates motion control and driving of the DC motor is designed.
12、On motion control with minimum attitude disturbance for redundant space robots
13、Longitudinal motion control of supercavitating vehicles using the robust pole assignment method
14、And introduce the motion control algorithm, including single axis zero positioning algorithm and multi-axis coordinated control algorithm.
15、Interpolation algorithm of cubic parameters spline curve based on motion control card
16、Nowaday most of the motion control system of the Moulding Machine are not open but close.
17、An automatic detection system of encoder error based on motion control technology
18、This paper deals with the problems of longitudinal motion stability of SW ATH ships moving in still water and of the motion control of SWATH ships in waves.
19、It deduced that the modern wheel-drum type flying shear's motion control method according with the given process of it.
20、This paper introduces a double freedom degree motion control system of satellites antenna based on dual-redundancy hybrid stepping motor.
21、The nonlinear vertical motion control problem of a class of low-speed underwater vehicles equipped with vertical thrusters was studied.
22、"China' s badminton teams used to be very strong in the past decades. They showed superb skills in "clear"shot, drive, overhead smash, drop shot and hairpin shot."
23、The rebuilding of the numerical control system for shearing machine, which are made of motion control unit, PLC and HMI, etc, was presented.
24、A new tension control system integrated into the platform of motion controller is developed in this article for the numerical control system of multi-axes filament winding machine.
25、Design a automatic scanning system for the solder joint's ultrasonic detection by using advanced motion control technology in the system of the solder joint's ultrasonic detection.
26、The motion control of the hexapod parallel mechanism with high speed and high acceleration depends on the accurate dynamics model, proper simplification and real-time computing.
27、Nowadays, motion control technology receives considerable attention of the world and becomes to be one of the key technologies of integration of machinery.
28、This paper introduces how to control SCARA by PMACLITE motion controller. It expatiates how to tune AC servo motor and create track of SCARA based on PMAC.
29、Two: Time of win, understand the other party be more nasty, so as long as grasp the other party to make mistake and then go, if the other party motion control very good, change a place.
30、The simulation results show that the controller ensures the gesture and the energy to the desired goal, farther more the motion control of giant swing backword is realized in the simulation.
31、Aiming at the poor web uniformity of non-woven fabrics produced by traditional cross lapper, the motion control bus SERCOS is applied in the digital servo system of the W1251 cross lapper.
32、Implementation of a high performance stand-alone motion controller
-
如果可以我会爱你造句
1、如果可以我会爱你到天荒地老如果不可以我回爱你到地老天荒。2、如果可以我会爱你到天荒地老。...
-
少年至尊造句
1、素魅流邙!一个血腥、狂暴,但是却极负正义的少年至尊,在这个纷乱残酷的世界里,他为了自己的正义,以杀止杀,以杀*道,最终成就一代杀戮之神!2、素魅流邙!一个血腥、狂暴,但是却极负正义的少年至尊,在这个纷乱残酷的世界里,他为了自己的正义,以杀止杀,以杀*道,最终成就...
-
甘爽造句
1、菜品特点:金黄似珠,皮酥馅腴,味清鲜甘爽。2、一茶友寻得邹炳良老先生亲传的小罐手工普洱熟茶,兴高采烈取来让我冲泡,一享其酽纯甘爽。3、全身心贯注在茶上,一口一口慢慢品茗,不要在意茶味的甘苦,你的心越清净,喝出来的茶越清香甘爽。...
-
前交叉韧带造句
1、结果前、后交叉韧带、外侧副韧带损伤2例,前交叉韧带损伤3例,后交叉韧带损伤3例,内侧副韧带、前交叉韧带损伤1例,半月板损伤1例。2、损伤的前交叉韧带表现为双能肌腱模式下双能染*低于患者对侧正常的前交叉韧带。3、日志源地址为前交叉韧带有关的掉线。4、结论前...