cylinder block造句

Position the cylinder heads onto head gaskets and cylinder block.

Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble).

Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).

Remove the water pump from the cylinder block.

The features of cylinder block and cylinder head core assembly vertical casting process are introduced.

Imported mirror cylinder block cylinder, oil-free lubrication, friction coefficient, corrosion-resistant, with superior durability and reliability.

The mechanism consists of several parts like the crankcase, cylinder block, pistons, connecting rod, crankshaft, etc.

This is fitted in the cylinder block and is driven by the chain drive.

Dial gauge with universal dial gauge bracket must be screwed to the cylinder block and placed against the crank arm.

The application of quality control spot in foundry reduces the scraps of cylinder block from 45.9% to about 20% of total scraps.

This paper the cause of the scab of the inside surface of cylinder block on condition that the resin sand cores are made in cold core box.

Using furan sand to produce heavy diesel engine block and crankshaft eliminated defects of castings including “penetration/burn-in”,“shrinkage porosity”,“big dimension deviation” of cylinder block,“penetration/bum-in”,“misrun”and“run-out”of crankshaft,and so on.

The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft.