oil seal造句

Install rear oil seal.

drive pinion oil seal

oil-proof a. oil seal oil-tight radial selector

Install new front crankshaft oil seal.

steering knuckle case oil seal retainer

Form of the structure can be divided into single-lip oil seal and oil seal lips.

Skeleton type can be divided according to package seal, and seal the exposed skeleton oil seal assembly.

Remove and discard the front crankshaft oil seal.

Replace the oil seal in the timing case cover.

If the leakage occurs at the rear oil seal area, refer to the section, Inspection for Rear Seal Area Leak.

Research of front oil seal cover of engine for SVW and FVW.

Install the new upper rear bearing oil seal with the white paint facing towards the rear of the engine.

Imported axletree and framework oil seal assures the liability of rotary precision and airproof, and reduces the rate of troubles.

Load type bearing and oil seal device, and a sound proof clapboard, can effectively prevent the vibration and noise, ensures the processing object is not polluted by oil.

For example, the main driving axle reducer seal assembly technical requirements: input flange oil seal centerline hole of the center line of the small eccentricity of more than 0.1mm.

The drawing cylinder of C7620 is very difficult to assemble and disassemble; the oil seal of the drawing cylinder is easy to wear down faster and causes leakage.

The main products are soft shaft, barrows, engine stents, pipes, the rubber sealing strip, oil seal, high subsection, stamping the and so on.

The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.

Guangzhou Qi-chang company with NOK 20 years history of cooperation, specializing in a variety of motorcycle oil seal, seals, ordered machinery and equipment seals.

After a long time, the main oil seal can be deformed; sealing effects can be reduced, and sealing functions can be even lost.

In addition, an imagination of using the reverse setting of oil seal to produce the microleakage inord er to make clean the lip contact region using in the agricultural construction Mach...