burr造句

Applications of removing burr of skeleton based on PCNN

The formation and critical conversion of the cutting-direction burr

Cut tube end square. Ream, burr and size.

4. Reasons and influencing factors of metal burr formation are discussed; mathematical model in cutting direction burr is set up;

Analysis shows that the main factor of instability of insulation resistance is machining burr.

This form of scar treatment uses a motorized burr, which usually contains diamond particles.

Side of Al/Ni strip/plate should be even cut without burr.

Realistic society and will of the people like burr Ban Za in its back.

Provided with a burr-trimming cutter, the bias-adjustable device can remove automatically the burrs on the polished rod.

The surface of the syringe must be clear and pure; rough edge, burr, plastic stream, defect are not allowed.

Firstly, gray image changed into binary image. Then, noise and stub burr is removed by using basic operation of mathematical morphology-dilation and closing operation.

But the song has lost its burr and acquired instead a Texas accent, and a few new verses and fillips by the singer.

The test on copper foil in winding shows the monitoring method is effective, and the device can find flaws such as burr, Nick, and pinhole.

Everyone knows how Mythical National Championships are the burr under my saddle, and I just can't let well enough alone, especially when I have a point to make.

The life of the drill bit, the burr at the outlet and the roughness of the machined surface when drilling micro holes with ultrasonic vibration are studied.

Mainly explains the methods for fixture improvement and accurate grinding methods study and the measure for the control and elimination of the burr in the course of the vale spool's precision working.

Place "A" panel (4" x 6"), sharp burr edge down, on bottom half of (4" x 12") so that cut edge of (4" x 6") barely covers all oil.