bending moment造句

But the bending moment at the central hinge must vanish.

The bending deformation of the aspherical bending lapping tool under the action of bending moment was analyzed according to its deformation feature in high speed lapping process.

If the stress produced by the additional bending moment is too large, the bolt will break.

This increases both the rigid body rotation of the vehicle and the bending moment.

This makes the bolt bear the preload and work load, but also bear the role of additional bending moment.

And for the frame beam end bending moment amplitude modulation factor seems embodiment its value in practice projects.

Theoretically analyzing the method and formula which can deduce the moment function of piles by measured bending moment through model tests.

The bending moment of the piles performed similar variation and the maximum moment occurred at the lower section of the piles.

And the invention can effectively release end bending moment of the stay bar, convenient to construct and improve bearing ability of the structure.

The calculation of ledger maximum bending moment and deformation the even load of scaffold board and live loads above the ledger.

It is proved that the optimality conditions are also sufficient if the objective function is a convex function of the plastic limit bending moment.

This paper analyzes the error of torque sensor of strain-resistor which derives from the influences of bending moment on elastic axis, and discusses the Eliminating techniques.

Stadium rostrum above the rain awnings overhung 24 meters, the contour approximate to bending moment curve, three connected the lower deck spiral stairs, from the terraces layered overhung out.

The impact force-time history between the structure and the moving rigid-body, shear force and bending moment distribution along the beams, axial force distribution along the bars were calculated.

Motorcycle disk brake is widely used because of its small radial dimensions, axial application of force along the disk when braking, no bending moment on brake shaft and braking stability.