grinding wheel造句

ceramic high heavy grinding wheel

mechanical grinding wheel forming equipment

The tools introduced include drill, millstones, reamer, grinding head, grinding wheel, grinding shaft.

Keywords: dressing, grinding wheel, wear, diamond form roller.

The motion modalities of CNC tool grinders with moving grinding wheel and swing grinding wheel were analyzed.

A certainty range adaptability research by a electroplate diamond grinding wheel and a high-frequency induction brazed diamond grinding wheel grinding vary material.

The method of dressing ceramic-bonded corundum grinding wheel by using diamond dressing wheel, then using dressed profile grinding wheel grinds roller surfaces of arc shape is introduced.

This paper analyze the influence of grinding wheel surface characteristics and dressing on grinding roughness of surface.

The Computer Controlled movements of the grinding wheel head will allow the maximum flexibility in the profile grinding.

It analyzes the character of the current super-abrasive grinding wheel, looks into the advantages and foreground about brazed grinding wheel.

Stainless steel pipe cutting means less than the use of ordinary grinding wheel piece cutting, should use a special grinding wheel piece may be plasma cutting.

The advantage of using v-bond diamond grinding wheel to grind PDC is the higher grinding efficiency, the better uniformity of PDC size and grinding noise.

The difficulty in NC grinding is that the size of the work piece cannot be invariable because the grinding wheel will be abraded continuously in the grinding process.

A dressing experiment on dish diamond grinding wheel with GC cup wheel was carried out and studied.

Some new methods of dressing ultrahard abrasive grinding wheel and ELID dressing technology were summarized.

SPINDLE HEAD: Part of a machine, which supports and drives the grinding wheel.

It is also suitable for grinding and polishing glass, wood, stone and other products, resin grinding wheel is manufactured, novel materials emery cloth.

When operating, only need to place vamp edge between grinding wheel and rubber wheel according to the instruction of width regulator, then the machine will trim vamp automatically.

The grinding wheel finisher has the structure to be simple, dexterous, characteristics and so on easy to operate, may carry on the renovation to ordinary and the ultra hard grinding wheel.

Returning original processing method of AE signals is pretended to monitoring grinding wheel dull in this paper, based on this, dull monitoring and dressing system for grinding wheel is developed;

The errors of grinding wheel dressed by diamond point cause the race to produce non-circular arc tooth profile errors.

Such grinding wheel has advantages as high grinding ability and high grinding efficiency, but they are easy to induce scratches on the ground surfaces and hence make bad surface machining quality.

When a nelial gear is under form grinding, it is not easy for form grinding wheel, if dressed by the equivalent number of teeth of spur gear, to attain the precision required by standards.

Based on analyzing the gear parameters, the grinding of the gear face with an end face of the grinding wheel was realized by changing the rotating Angle of rotating table.

He had learned to read the millionths of an inch on the micrometer and to shape the grinding wheel with an instrument set with a diamond.

The cube BN grinding wheel was adopted to grind electric ceramic insulator, and the residual stress of insulators was analysed by the X-ray diffraction (XRD) technique.

It is a reliable and useful new method to moniter the dul-ling process of grinding wheel by making use of acoustic emission (AE).

SHOULDER: Defect found on rib or outer diameter; a raised edge on rib face caused by grinding wheel; raised surface at either end of outer diameter raceway.

The grinding wheel is easily accessible enabling safe, simple wheel changes and the spindle belt can be changed from a convenient access panel on the side of the machine.

If some care and support sprocket wheels running status can not continue to use, it may cause partial grinding wheel, but also probably caused by the wear track chain.

Overhaul, the only steel and iron brush or sandpaper smooth grinding wheel as it will give the pump at work to reduce fuel consumption or power consumption 9% - 14%.

The main products include fiber glass yarn, fiber glass fabric, RPGB-Tape, fiber glass reinforcement for grinding wheel, Texturing of yarn, winding roving, SMC roving, Chopped strands and so on.

The use of CBN grinding wheels makes rough grinding possible as well as precise finish grinding.

Resin bond grinding wheels have characteristics of good self-sharpening, high grinding efficiency, low grinding heat and no loading. The processed workpiece has.

Hard metals can be easily cut with grinding wheels.

Using the method of fractal geometry to describe the profile of grinding wheels.

Another innovation came when Bakelite was patented as a replacement for shellac in grinding wheels.

DELTA also includes a gooseneck lamp to help get a clear view of the workpiece and grinding wheels.