rotation speed造句

The rotation speed of crank and air flow speed are the main factors.

You can base this prediction function on the speed of the object, steering or rotation speed.

Allied Calliope rotation speed decreased to33 from35. Acceleration decreased to1.3. Max speed decreased to5 from5.2.

A torque proportional quantity is calculated by multiplying the rotation speed increase by the engine rotation speed at the time when the learning injection is performed.

The experiment shows that the tachometer has a good performance of measuring low rotation speed as well as high rotation speed.

Tell me the oil temperature, oil pressure and rotation speed at present?

Amplified by proximity, the gravity of the stars modifies the rotation speed of the ellipses.

Analysis of optimized wheel rotation speed of composite desiccant based on silica gel

Closed-loop control of rotation speed of4 WD electric vehicle is studied.

How to use the monolithic machine to inspect rotation speed and angular displacement

The influence of tool rotation speed and the match of tool rotation speed with welding speed on the FSW joint morphology of 6063 aluminum alloy and its mechanical properties is studied.

When swinging drive mechanical operation, such as the rotation speed of the force to make efforts axial shaft before and backward rotation and enable higher plane.

Step motor control, by pulse by changing the order of electricity can change the motor rotation direction, change the pulse frequency can change the motor rotation speed.

The diameter of seedling greatly influences the cutting resistance and the rotation speed greatly influences the cutting-out rate.

The closed loop control strategy by model tracking2- freedom rotation speed and the sight-based velocity estimation method are introduced.

Designed system can control the rotation speed of pneumatic motor effectively and thus get the adjustable feeding speed of the thread.

The rotation speed of shoe last and the moving speed of the roller bearing are adjustable to meet the need of flattening.

The performance of high speed rolling bearing was studied under unstable conditions of rotation speed fluctuation, and the failure modes of the bearing were analyzed under such conditions.

An adaptive algorithm of rotation speed is introduced in this paper. This algorithm assures not only the precision at high speed and low speed but also the real-time performance at low speed.

To convert measurements of the Milky Way's rotation speed to mass, astronomers must rely on models of how dark matter is distributed in the galaxy.

In this model, power distribution in stator winding and rotor winding is calculated according to both wind-power curve and rotation speed control law of VSCF wind turbine.

High delivery lift and high backpressure required in fuel throttle valve test were obtained through higher rotation speed of the main pump.

Ion beam etching (IBE) was applied to treat the as-polished surfaces of a CLBO crystal with varying in rotation speed of clamp, etching times and incidence angles.

According to the parameter selection problems of diamond drilling in hard rocks analysis is made from weight on bit, rotation speed and pumping quantity.

Because the drilling cost is not the sole cost of bit, it is necessary to discuss here the highest rotation speed of bit in cutting rock at the lowest drilling cost.

The higher the temperature and the longer the resident time was, the higher the oligomer content was during polyester melt trans - fer course at a fixed screw rotation speed.

Engine tests of starting procedure control and rotation speed in closed loop have proven that the time precision and reliability of this software meet the demands of engine control system well.