raceway造句

non-raceway burning

Roller raceway type elevation-azimuth antenna pedestal

raceway-lip grinder for roller bearing inner race

raceway-lip grinder for roller bearing outer race

Control method for grinding quality of spherical bearing asymmetrical raceway

While the grinding allowance of inner diameter, inner raceway outer diameter and outer raceway was reduced, the quality and the economic effect were increased.

Copying turning method for inner ring raceway of self-aligning roller bearing

Measurement of odd boss raceway diameter of linear motion ball bearing

Analyzation and application of turning method for tapered roller bearing inner ring raceway

Characteristics of dissolved oxygen change in the open raceway pond for cultivating spirulina platensis;

Control method of inner raceway center distance of spherical roller bearing

Like self-aligning ball bearings and spherical roller bearings, they are provided with a spherical outer-ring raceway.

Analysis of contact stress & design of elliptical raceway for angular contact ball cage type constant-velocity universal joints

The practice and race of racing kart is a high excitement and danger. All person at raceway must responsible for their own safety, including racer, raceway worker and machinist.

The result of test and analysis proves the raceway reducer has been made with desired technical parameters.

This requires Film thickness in the order of four or more times greater than the average surface finish values of the ball and raceway.

In grinding Process, the raceway edge of three point and four point contact ball bearing is easy to produce black skin, thus it causes undeserved waste preducts loss.

For needle roller bearings without inner ring, a suitable internal clearance is achieved by selecting the appropriate tolerance for the raceway diameter.

SHOULDER: Defect found on rib or outer diameter; a raised edge on rib face caused by grinding wheel; raised surface at either end of outer diameter raceway.

By analyzing the key processes of bearing ring, the principle of delaying raceway failure is discussed, at the same time some methods of solving problem on technology is put forward.